Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Manual
In case of difficulty
About your new thermostat
Heating or
cooling system
does not respond
"Cool On" or
"Heat On" is
flashing
Other problems
69-2415ES—03
• Press SYSTEM button to set system to Heat. Make sure the temperature
is set higher than the Inside temperature.
• Press SYSTEM button to set system to Cool. Make sure the temperature
is set lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.
• Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 14).
• If the above measures do not resolve the problem, check the In Case of
Difficulty section in your thermostat Installation Guide .
22
Publicidad
