Toto Kiwami Renesse TS170F Manual De Instrucciones Y Del Propietario página 5

Set-up installation options:
1) Complete Set
Showerhead
Single vol.
control trim
Dual vol. control
trim & valve
Mixing
Handshower
valve trim
adapter
& valve
Handshower trim
& handshower
Bath spout
Installation of Handshower
Adapter
1. After confirming the rough-in of
the adapter provided, connect
the adapter with the single
volume control valve.
2. Make sure that the distance
between finished wall surface
and valve with plaster guard falls
between MIN and MAX.
CAUTION: Leave plaster guardon
the valves until tile work is complete.
InSTallaTIon PRoCeDURe
2) w/o
Handshower
Showerhead
Dual vol. control
& valve
trim & valve
Mixing
valve trim
& valve
Bath spout
3) w/o wall spout
Showerhead
Handshower
Dual vol.
control
trim &
valve
Mixing
valve trim
& valve
Single
vol. control
trim & valve
Handshower
trim &
Handshower
handshower
adapter
CAUTION: Refer to Handshower
Adapter Installation Manual for detailed
installation procedure.
Single vol.
control valve
Plaster
guard
FINISHED
WALL
NOTE: If the flex hose outlet does not
face downward, remove the connector
and try again.
5
4) Showerhead
only
Showerhead
Single
vol. control
trim & valve
Mixing valve
trim & valve
From thermostatic
mixing valve
1/2" pipe
Handshower
adapter
Plaster guard
2-15/16" (75mm) MIN
3-9/16" (90mm) MAX