Shure LEGENDARY PERFORMANS GLX-D Manual Do Usuário página 6

Bodypack Transmitter
① Antenna
Carries wireless signal.
② Status LED
Indicates transmitter status.
③ Power Switch
Turns the transmitter on/off.
④ TA4M Input Jack
Connects to a 4-Pin mini connector (TA4F) microphone or instrument
cable.
⑤ Micro USB Port
Connection for battery charging and firmware updates.
⑥ Link Button
• Press and hold within 5 seconds of power-on to manually link with
receiver
• Press momentarily to activate Remote ID function to a linked
receiver
⑦ Battery Compartment
Holds Shure rechargeable battery.
Transmitter Status LED
LED is green during normal operation.
LED color or flashing indicates a change in transmitter status as shown in
the following table:
Color State
Green Flashing
(slow)
Flashing
(fast)
Flashes
3 times
Red On
Flashing
Red/Green Flashing
Amber Flashing
6
Status
transmitter attempting relink with receiver
unlinked transmitter searching for
receiver
indicates locked transmitter when power
switch is pressed
battery life < 1 hour
battery life < 30 minutes
remote ID active
battery error, replace battery
1
7
Wearing the Bodypack Transmitter
Clip the transmitter to a belt or slide a guitar strap through the transmitter
clip as shown.
For best results, the belt should be pressed against the base of the clip.
4 3 2
off on
5
6
6
7
1
GLXD2
on