SAFETY INSTRUCTIONS
- Read carefully this manual before using the appliance.
- Do not touch the appliance with wet hands.
- Do not immerse the appliance, its cord and plug in water or any
other liquids.
- Always switch off the appliance by turning the switch into the 0
position (off).
- Do not immerse the appliance, its cord and plug in water or any
other liquids.
- Close supervision is necessary when using the appliance near
children.
- Do not place the cord over sharp edges and keep it away from
hot surfaces.
- Before use always make sure that no tool (e.g. spoon, spatula) is
left in the jug or bottle, because it may cause damage to the ap-
pliance or body injury.
- Before starting the appliance make sure the jug or bottle is properly
mounted on the base.
- Before disassembly wait until the motor stops completely.
- Before cleaning the appliance, unplug it from the power outlet!
- Take extreme care when touching cutting blades, especially when
removing them for cleaning.
- Do not immerse the blender in water or any other liquids.
- Do not exceed the maximum capacity indicated on the blender
container.
- Wait until hot ingredients cool down before processing them.
- Wash the jug before using the appliance for the first time.
- Do not use the appliance if it is damaged, also if the power cord or
plug is damaged – return the appliance for repair to an authorized
service centre.
- Before use always make sure that all parts of the appliance are
properly installed.
- To avoid the risk of damage, fire or injury, always use the attach-
ments recommended by the manufacturer.
- Always unplug the appliance immediately after using it and before
cleaning.
- Do not leave the operating appliance unattended.
EN
19