Whalen Stetson SMSSDSK Manual Del Usuario página 8

Step 3
H1 x 10
B
a)
Position the Desk Top (A) upside down on a level and protected surface as shown.
b)
Align the assembled base to the Desk Top (A) properly and insert ten 15mm Bolts (H1) with
Washers (H2 and H3) through the metal tabs and screw into the threaded inserts on the Desk
Top (A).
c)
Now, go back and securely tighten all the bolts. Make sure all the parts are tight and there are
no gaps between the parts. This will help keep the unit square.
H2 x 10
E
D
A
H3 x 10
C
H1
H2
H3
8 | P a g e