Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction Manual
- Release the clip at the bottom and remove the HEPA filter from
the vacuum cleaner's lid.
- The grating and float should not be removed.
- Pull out and remove the Nylon filter.
- After removing the filter and bag, reinstall the top lid where
indicated and lock the lateral clips.
NOTE: when the filters need to be cleaned, the same
procedure should be followed.
5. Solid suction mode
- Make sure the filters and bag are installed properly and connect
the accessories according to the operation to be performed.
IMPORTANT: always use all the supplied filters for suctioning
solids.
6. Emptying the tank
- When working with liquids, you can use the auxiliary hose to
empty the tank.
- To empty the vacuum cleaner in liquid suction mode, loosen
the lateral clips, take off the lid, remove the nylon filter and tilt the
tank into horizontal position with the auxiliary handle.
44983 - 2400 W Wet and Dry Vacuum Cleaner
21
Publicidad
