Descargar Imprimir esta página

Silvercrest SLA 90 A1 Instrucciones De Utilización Y De Seguridad página 38

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 102
connect it with the charging socket of your
netbook / ultrabook / notebook.
The tip of the adaptor plug should slide into the
socket easily and fits securely without too much
play. Don't force it into the socket or connect
it in the wrong position, otherwise your device
may be damaged.
Refer to Fig. B which shows a connection
example using adaptor plug "A".
Connect the socket of the adaptor plug
9
with the DC output connector
.
1
Provide power
Connect the power cable connenector
to
7
the power cable socket
8
.
2
Insert the power plug
into an easily
accessible mains socket. The requirements for
the voltage can be found in the „Technical
data" section.
The power indicator
will illuminate green
4
and the charging indicator of the netbook /
ultrabook / notebook will also illuminate. This
indicates that power is being provided to the
netbook / ultrabook / notebook.
Disconnect power
Grip the power plug
2
and unplug it from the
mains socket. Do not pull on the power cable
.
5
Unplug the tip of the adaptor plug
from the
9
socket of the netbook / ultrabook / notebook.
38 GB/IE

Publicidad

loading