Descargar Imprimir esta página

Orbegozo BP 0102 Manual De Instrucciones página 13

Calefactor por radiación

Publicidad

Idiomas disponibles

Idiomas disponibles

BP 0102
these instructions must be surrendered to the new
owner!
SAFE POSITIONING
1. The heater must not be located immediately below a socket outlet
2. For your own safety and that of others: water and electricity are a dangerous combination! Do not
use this heater in the immediate surroundings of a bath, a shower or a swimming pool. Ensure that the
appliance cannot fall into water (bath wash basin, shower cubicle, etc.)
3. Please read also the safety information's before using.
4. Do not use the heater on extremely deep-pile carpets!
5. Do not use the heater in an upright position.
INSTRUCTIONS FOR USE
At the rear, on the right side, they have a selector switch that let you choose 600 or 1200 W.
MAINTENANCE
Before undertaking any maintenance operation, disconnect the appliance from the power supply.
-
This appliance does not require any particular maintenance. For cleaning it is recommended to use
-
a soft moist rag and neutral detergent. Do not use an abrasive cloth or devices which could affect
the outward appearance of the appliance. Check that the parts exposed to the heat rays and the
ventilation are free of dust and dirt.
During cleaning, be careful not to touch the quartz heating elements.
In case of breakdown and/or poor function of the appliance, disconnect the appliance from the
-
power supply and contact an authorized service center. Always request the use of original spare p
arts.
The non-observation of these instructions can compromise the safety of the appliance and render
guaranty invalid.
TECHNICAL CHARACTERISTICS
Model: BP 0102
Voltage: 230 V
Power: Maximum 1200 W (600 W – 1200 W)
Tension: 50 Hz.
13

Publicidad

loading