Descargar Imprimir esta página

Voltr SNO2000WAC Manual De Instrucciones página 33

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
PEOPLES' SECURITY
Be vigilant, pay attention to what you do and always use an electrical tool with care. Do not use an elec-
trical tool when you are tired or under the influence of drugs, alcohol or drugs. A moment of inattention
during the use of electric tools can cause serious injuries.
Porter individual protective equipment as well as protective glasses in all circumstances. Wearing in-
dividual protective equipment such as anti-dust mask, shoes non -slip security, protection helmet or
acoustic protection, depending on the use of the tool electric, reduces the risk of injuries.
Wear appropriate clothes. Do not wear loose clothes or jewelry. Hold the hair, clothes and gloves out of
reach of moving parts. Ample clothes, jewelry or long hair can be taken in mobile parts.
Avoid any impromptu start -up. Make sure the switch is on the position stop before connecting the
battery, entering the tool or transporting it. A risk of accident exists if your finger is on the electric tool
switch when you wear it or when you connect it to the walking position.
Do not rush. Be sure to keep a safe position and keep your balance at any time. This will allow you to
better control the electric tool in unexpected situations.
ELECTRICAL SAFETY RULES
It must be that the electrical tool sheets are adapted to the base. Never modify the sheet of any way. Do
not use adapters with earth connection tools. Of the Unspected sheets and suitable bases will reduce
the risk of electric shock.
Do not mistreat the cord. Never use the cord to wear, pull or disconnect the tool. Maintain the cord away
from heat, lubricant, edges or moving parts. When we use an outside tool, use an extension suitable
for external use. If the use of a tool in a wet location is inevitable, using a power supply by a residual
differential current device (RCD).
The power cable cannot be replaced. If the cable is damaged, it is necessary to put the device with a
scrap.
27/03/2023
Immerate this manual for any subsequent need.
EN
33

Publicidad

loading

Productos relacionados para Voltr SNO2000WAC