Publicidad
Idiomas disponibles
Idiomas disponibles
HDR/HLG content, if the HDR/HLG content is received
through an HDMI input. The source device should also
be at least HDMI 2.0a compatible in this case.
Dolby Vision
Dolby Vision™ delivers a dramatic visual experience,
astonishing brightness, exceptional contrast, and vivid
colour, that brings entertainment to life. It achieves this
stunning image quality by combining HDR and wide
colour gamut imaging technologies. By increasing the
brightness of the original signal and using a higher dy-
namic colour and contrast range, Dolby Vision presents
amazing true-to-life images with stunning detail that
other post-processing technologies in the TV aren't
able to produce. Dolby Vision is supported via native
and market applications, HDMI and USB inputs. When
the input source is set to the related HDMI input press
the Menu button and set the HDMI EDID Version
option in the TV Options>Settings>Channels &
Inputs>Inputs menu as EDID 2.0, EDID 2.1 or Auto
EDID in order to watch Dolby Vision content, if the
Dolby Vision content is received through an HDMI
input. The source device should also be at least HDMI
2.0a compatible in this case. In the Picture Mode
menu three predefined picture modes will be availa-
ble if Dolby Vision content is detected: Dolby Vision
Bright, Dolby Vision Dark and Dolby Vision Vivid.
All allow the user to experience the content in the way
the creator originally intended with different ambient
lighting conditions. To change the Picture Mode setting
press the Menu button while watching the Dolby Vision
content and go to Picture menu. While watching Dolby
Vision Content via an application, except YouTube,
Netflix and Multi Media Player, you will not be able to
access the Picture menu and set the Picture Mode.
OLED TV Operations
OLED panels have some procedures in order to extend
the panel lifetime and provide protection from image
sticking problem.
OLED Fast Panel Clean
• After every 4 hours of use, the TV will perform OLED
Fast Panel Clean operation automatically when
next time the TV is switched into standby mode.
If the TV is in Store Mode this operation will be
performed 3 hours after the last successful OFF-RS
compensation.
• It will take about 6 minutes. In order not to interrupt
the operation it is recommended to wait until the
operation is completed.
• The LED will be blinking during the operation.
• When the operation is complete, the TV will switch
into standby mode.
• This operation can be interrupted by cutting the
power supply to the TV or switching the TV on. In
this case OLED Fast Panel Clean operation will
performed when next time the TV is switched into
standby mode.
OLED Compensation
• This operation will be performed automatically at any
time of the day when the TV is switched into standby
mode after every 1500 hours of use.
• After a period of 60 seconds in standby mode the
TV will switch on with blank screen and OLED
Compensation function will be performed if the
panel is at proper temperature.
• This will take about 1 minute and during the operation
the LED will blink and a horizontal line will appear
on the screen, moving from the top to the bottom
of the screen.
• After OLED Compensation operation is completed
the TV will switch into standby mode.
• OLED Compensation operation can be interrupted
at any time by cutting the power supply to the TV or
switching the TV on.
• If OLED Compensation operation is interrupted a
massage will appear on the screen stating that the
OLED Compensation operation was interrupted
when next time the TV is switched on. In this case
OLED Compensation operation will be performed
when next time the TV is switched into standby mode.
• This operation can be performed manually using the
OLED Compensation option in the Settings>Device
Preferences>Picture>OLED menu. This operation
will take about 90 minutes and then the TV will be
switched off automatically. Do not unplug the mains
lead during this period. It is not recommended to
perform this operation more than once a year or
unless requested by authorised service personnel.
Manual OFF-RS Compensation
• This operation can be performed manually using
the Manual OFF-RS Compensation option in the
Settings>Display & Sound>Picture>OLED menu.
• It will take about 15 minutes. In order not to interrupt
the operation it is recommended to wait until the
operation is completed.
• The LED will be blinking during the operation.
• When the operation is complete, the TV will switch
into standby mode.
• This operation can be interrupted by cutting the
power supply to the TV or switching the TV on. In
this case, OFF-RS operation will be performed the
next time the TV is switched into standby mode after
4 hours of use.
Pixel Shift
• The images will be automatically shifted by one pixel
every 80 seconds to prevent image sticking.
English - 6 -
Publicidad
