Milwaukee M18 FUEL 2736-20 Manual Del Operador página 5

SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Read operator's manual
Wear eye protection. Use hearing
and respiratory protection.
Keep hands and body out of the path
of the saw blade.
Match kerf width of blade (>1.8 mm)
and blade body thickness (<1.55 mm)
with the marking on the riving knife to
reduce the risk of kickback.
Only use 8-1/4" (210 mm) saw blades
Match the arrow direction on the saw
blade with the arrow direction on the
riving knife.
US UL Listing for Canada and U.S.
C
SPECIFICATIONS
Cat. No. ..................................................... 2736-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
No Load RPM ..................................................6300
Blade Arbor ....................................................... 5/8"
Blade Diameter ..............................8-1/4" (210 mm)
Blade Tilt .................................................. -3° to 47°
Miter gauge angle ......................... 60° Right or Left
Cutting Depth, 0° Bevel .................................... 2.5"
Cutting Depth, 45° Bevel ................................ 1.75"
Blade Kerf ..................................>1.8 mm minimum
.................................<2.2 mm maximum
Blade body thickness..............<1.55 mm maximum
Riving knife thickness ....................1.6 mm (0.063")
5