Aspect Controls - Panasonic TH-42PX500U Manual De Instrucciones

Screen 12 : Confirming Your Settings
Verify the Setup information is correct.
If it is, select Yes, end setup, and you see Screen 13.
If it is not, select No, repeat setup process, and you see
Screen 1.

Aspect Controls

CH
+
-
OK
VOL VOL
MENU CH RETURN
Mode
4 : 3
4
Zoom
4
Full
4
Just
INITIAL GUIDE SETUP for TV Guide / Aspect Controls
Let you choose the aspect depending on the format of the received signal and your
preference.
Press to change the aspect mode.
Note:
The available aspect modes depend on the receiving signal.
•
480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) : 4:3, Full, Just or Zoom
•
1080i / 720p : 16:9 only
Picture
4
4 : 3
3
16
Zoom
3 9
16
Full
3 9
16
Just
3 9
Screen 13 : Congratulations
You have successfully completed Setup!
Press key to display the "Helpful information" screen.
OK
Displays a 4:3 picture at its standard 4:3 size with gray side bars. (It
may create an after-image on screen if displayed for a prolonged
period of time.)
Expands a 4:3 picture uniformly (width and height) to full screen
width and then repositions the picture vertically. (Recommended for
letterbox. This will show picture at full screen size.)
Displays a picture at full screen size. (Recommended for anamorphic
pictures.)
Stretches the right and left edges of a 4:3 picture to fill the screen,
and the center of the screen has aspect correction applied. The size
of the picture depends on the original signal.
(Recommended for regular TV viewing.)
Explanation
51