Chauvet Professional OVATIONREVEE3 Guía De Referencia Rápida página 9

Main Level
Master/Slave
Dimmer
Curve
Dimmer Mode
Color User
Calibration Calibration
LED
Frequency
Fan Mode
Back Light
Gobo Power
Fixture Hours
LED Hours
Information
Only This Unit
Update
Multiple Units
Firmware
Other Fixture Type
Reset Factory
WARNING: When operating in Fan Mode: Off and Fan Mode: Silent, the fixture will become hotter to
the touch than when using other fan modes. Use proper protective equipment to prevent burns. Keep
a safe distance from flammable objects.
NOTICE: When operating in Fan Mode: Off and Fan Mode: Silent, output of the fixture will be reduced
and will not reach the same levels as when using other fan modes.
Ovation Rêve E-3 QRG Rev. 5
QUICK REFERENCE GUIDE
Programming Levels
Master
Slave
SCurve
Linear
Square
Inverse Square
Off
Dimmer 1–3
Off
Red
Green
Blue
Amber
Mint
Factory Calibration
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Auto
On
Off
Silent
10S
30S
2Min
Always On
On
Off
Version
UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
_ _ _ _ _ _.CHL
_ _ _ _ _ _.CHL
_ _ _ _ _ _.CHL
No
Yes
Description
Receives DMX signal from the DMX controller (master)
Receives DMX signal from the master unit
Sets the dimmer curve
Linear dimmer
Dimming curves, from fast (Dimmer 1) to slow (Dimmer 3)
Deactivates color calibration
Sets red LED maximum value
Sets green LED maximum value
125–255 Sets blue LED maximum value
Sets amber LED maximum value
Sets mint LED maximum value
Uses factory default white setting
Sets the PWM output frequency
Sets the fan to auto mode
Sets the fan to always on
Sets the fan to always off
Sets the fan to silent
Turns off display backlight after 10 seconds of inactivity
Turns off display backlight after 30 seconds of inactivity
Turns off display backlight after 2 minutes of inactivity
Display backlight always on
Enables/disables gobo power output
_ _ _ _H Shows total hours the product has been powered on
_ _ _ _H Shows total hours the LED has been powered on
V_._ Shows current firmware version
Selects an update file for this product, or shows "No
such file!"
...
Selects an update file for this and connected
Ovation Rêve E-3 products, or shows "No such file!"
...
Selects an update file for other connected products,
or shows "No such file!"
...
Resets settings to factory default
EN
8