Publicidad
Idiomas disponibles
Idiomas disponibles
4. Put the 20 lb. propane gas tank (not included)
into the tank holder (M). Turn the wing screw on
the outside of the tank holder (M) clockwise to
tighten the tank into the tank holder.
DANGER
Propane tank must be a minimum of 60 inches
away at all times.
5. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator
from the table top (A) to the cylinder valve
by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by hand
only.
6. Remove the rubber cap on the electronic igniter
(K) by unscrewing and slide battery (H) into the
battery slot. Make sure the positive side of the
battery faces outwards. Screw the electronic
igniter cap (K) over the battery tightly.
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
H
K
1-866-771-2663 | Page 7
M
PRESSURE
RELIEF VALVE
Publicidad
