Dell OptiPlex 7040M Manual Del Usuario página 9

Removing the VGA board
1. Follow the procedure in
2. Remove the cover.
3. To remove the VGA board:
a. Disconnect the VGA board cable from the connector on the VGA board [1].
b. Remove the screws that secure the VGA board to the computer [2].
c. Slide the VGA board to disengage the connector from the slot and lift it away from the computer [3].
Installing the VGA board
1. Align and insert the VGA connector into the slot on the computer.
2. Tighten the screws to secure the VGA board to the computer.
3. Connect the VGA board cable to the connector on the VGA board.
4. Install the cover.
5. Follow the procedure in
Removing the system fan
1. Follow the procedure in
2. Remove the cover.
3. To remove the system fan:
a. Press the blue tabs on both sides of the system fan [1].
b. Push the system fan to release it from the computer [2].
c. Turn the system fan over to remove it from the computer [3].
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Extracción e instalación de componentes 9