Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the Screen Size
Screen size selection depends on the type of video input.
1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2
Press the ▲ or ▼ button to select Size, then press the ENTER button.
3
Press the ▲ or ▼ button to select the screen format you want.
Press the ENTER button.
Press the EXIT button to exit.
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 : Expands the Zoom1 format picture.
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
• Just Scan : Use this function to see the full image without any cutoff when DTV
or HDMI 720p/1080i signals are input.
Press the P.SIZE button on the remote control to change the picture size.
➢
• In TV, VIDEO, S-VIDEO, and COMPONENT(480i, 480p) modes, all screen
modes can be selected. (16:9 ➞ Zoom1 ➞ Zoom2 ➞ 4:3)
• In COMPONENT(720p, 1080i) or HDMI(720p, 1080i) mode, 16:9, 4:3 and
Wide Fit can be selected.
• In Zoom1, Zoom2 and Wide Fit modes, you can move the picture on the
screen by pressing the ▲ or ▼ button.
• You can not change the picture size when PIP is set to Double.
• When Double (
,
be set.
• Wide Fit can be used when watching a Digital HD (High Definition) signal.
Wide Fit sets the optimum picture format by expanding it both horizontally and
vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit
does not support all external devices (DVD, VCR etc.).
) mode has been set in PIP, the Picture Size cannot
English - 28
T V
Size
16:9
Zoom1
▲
Reset
Position
Zoom2
▼
Wide Fit
4:3
Just Scan
Move
Enter
Publicidad
