Jimmy HW9 Pro Manual De Instrucciones página 5

Product assembly and disassembly
Noted: Cut off electricity before product assembly and
disassembly.
Metal tube assembly and disassembly
Insert the metal tube into the mainbody vertically until
a"click"sound is heard. Make sure metal tube is firmly
locked. To disassemble the metal tube, use a hard tool
to insert into the handle release hole and meanwhile
pull out the metal tube upward.(Fig 1)
Assemble and disassemble battery pack
1.Slide battery pack along the slot and press the battery
pack down firmly until a"click"sound is heard. The
battery pack is locked.
2.Press the battery pack release button and pull the
battery pack in the direction opposite to the assembly
to unlock the battery pack(Except for the replacement
of the battery pack, the battery pack doesn't need to be
taken out frequently)(Fig 2)
Charging holder assembly
Press the holder 1 and holder 2 into the charging base
until a "click" sound is heard.(Fig 3)
Place machine to charging base
To put machine back to charging base, hold machine
handle to lift the machine, aim charging slot on bottom
of machine to the charging socket on charging base
and put the machine into charging base. To use the
machine, hold machine handle and lift out machine from
charging base.(Fig 4)
Dirty water tank assembly and disassembly
To take off dirty water tank, hold machine with one hand
and hold dirty water tank with another hand, press dirty
water tank release button to pull out dirty water tank.
To assemble dirty water tank, place dirty water tank
bottom into mainbody, push dirty water tank towards
mainbody until a "click" sound is heard. (Fig 5)
Brushroll window and brushroll assembly and disassembly
To remove brushroll window, hold brushroll window latch and pull upward to remove brushroll window. To
assemble brushroll window, align the clips on two sides of brushroll window with the slots on two sides of
floorhead. Press brushroll window down until a "click" sound is heard. (Fig 6)
1
Battery pack
release button
2
3
4
5
Charging slot
Charging socket
Brushroll window
6
3