Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.
GENERAL INFORMATIONS
Attention this manual contains instructions for the exclusive use of the installer and / or professionally
qualified maintenance technician, in compliance with the laws in force.
The user is NOT authorized to operate the equipment.
In case of damage to people, animals or
contained in the manuals supplied with the appliance, the manufacturer can not be held responsible.
1.1.
SYMBOLS IN THE MANUAL
When reading this manual, particular attention must be given to the parts marked by the symbols represented:
DANGER!
Serious danger to safety and life
1.2. CONFORMING USE OF THE APPLIANCE
The device has been constructed on the basis of the current level of technology and the recognized
technical safety regulations.
Nevertheless, as a result of improper use, dangers could arise for the user's life and safety or other people, or
damage to the appliance or other objects.
The appliance is designed for operation in heating systems, hot water circulation and domestic hot water production.
Any other use is considered improper.
For any damage resulting from improper use, the manufacturer assumes no responsibility; in this case, the risk is fully
borne by the user.
Use according to the intended purpose also requires that the instructions of this manual have been scrupulously
followed.
1.3.
WATER TREATMENT
When water is with hardness higher than 15°F, we recommend the use of descaling devices, the choice of
which, must be made based on the characteristics of the water.
.......................................................................................................................................................................................
1.4. INFORMATION TO BE SUPPLIED BY THE INSTALLER TO THE USER
The user must be instructed on the use and operation of the solar system. In particular, it is the installer's
job:
-
Deliver to the user these instructions, as well as the other documents relating to the appliance included in the
envelope contained in the package. The user must keep this documentation in order to have it available for any
further consultation.
-
Remember that in compliance with the regulations in force, check and maintenance must be carried out in
compliance with the requirements and with the periodicity specified by the manufacturer.
-
If the appliance is sold or transferred to another owner or if you move and leave the appliance, always make sure
that the manual accompanies the appliance so that it can be consulted by the new owner and/or installer.
In case of damage to people, animals or things caused from failure to comply with the instructions of this manual, the
manufacturer cannot be held responsible.
1.5. SAFETY WARNINGS
The installation, adjustment and maintenance must be performed by professionally qualified personnel in
accordance with the law 46/90. At the end of the installation process, it must be issued a '' DECLARATION OF
CONFORMITY '' attesting to the completion of the work in a workmanlike manner in accordance with the rules and
guidelines. Incorrect installation can cause damage to people, animals and things, against which the manufacturer
cannot be held responsible in any way.
things
resulting from failure to comply with instructions
WARNING!
Possible dangerous situation for the
product and the environment
Pag.1 / 9
ENGLISH
NOTE!
Suggestions for users
Publicidad
Tabla de contenido
