Technical Specifications And Dimensions - ATI DISCOSOL-200 L Manual De Instrucciones

2.

TECHNICAL SPECIFICATIONS AND DIMENSIONS

2.1
- TECHNICAL FEATURES
The purpose of this appliance is to heat up the sanitary hot water; it can be used for systems that exploit the
principle of natural circulation.
Main parts (see FIG_02-1):
A. Tank: it is entirely made of steel and internally subjected to a glass-coating treatment (or porcelain enamel), ie a
vitreous coating with firing at over 850 ° C.
B. Tray: it is obtained with a co-extrusion process of layers of ABS and PMMA.
C. Thermal insulation: made of closed cell polyurethane foam.
D. External dome in PMMA (extruded polymethyl methacrylate sheet).
E. Internal dome in PMMA (extruded polymethyl methacrylate sheet); it is only present in the DS02 model.
F. Magnesium sacrificial anode: prevents tank corrosion.
G. Combined temperature and pressure safety valve: protects the tank from possible excessive pressures caused by
expansion of the water during heating. Automatically, without the assistance of energy other than that of the hot
pressurized fluid, it discharges a quantity of fluid such as to prevent the preset pressure and temperature limits to
protect the storage tanks from being exceeded. Calibration: 700 kpa / 92 ° C.
H. Hot water outlet.
I. Cold water inlet.
2.2
- DIMENSIONS AND DETAILS
DIMENSIONS (see FIG_02-2)
TECHNICAL DATA
capacity
empty weight
full weight
max pressure input
max pressure accumulation
max storage temperature
absorbent surface
total area
no. domes
electrical resistance
2.3
HYDRAULIC CIRCUIT
see FIG_02-3
A. cold water inlet (3/4 "M)
B. hot water outlet (3/4 "M)
C. exhaust safety valve (3/4 "F)
Grade of
inclination
width mm
depth mm
height mm
Cod.
L
kg
kg
kpa
kpa
° C
m 2
m 2
No
W
Pag.3 / 9
11° 28° 36°
1095 1095 1095
1093 1119 1148
649 816 889
DS01 DS11 DS02
200 200 200
72 72 72
270 270 270
400 400 400
600 600 600
92 92 92
0.92 0.92 0.92
1.20 1.20 1.20
1 1 2
- - - 1.200 - - -
ENGLISH
DS12
200
72
270
400
600
92
0.92
1.20
2
1.200