General Warnings - ATI DISCOSOL-200 L Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1.
GENERAL INFORMATIONS
Never attempt to carry out maintenance works or repairs on your own initiative. Any intervention must be
performed by professionally qualified personnel; it is suggested the stipulation of a maintenance contract. Poor or
irregular maintenance can compromise the operational safety of the system and cause damage to people, animals
and things for which the manufacturer cannot be held responsible.
Changes to the parts connected to the appliance. Do not modify the following elements:
- to the water and electricity supply lines, where existing
- to the constructive elements that affect the operational safety of the appliance
The use of untested connection or safety devices or unsuitable materials for use in solar systems is forbidden (eg
expansion tanks, pipes, insulation).
It is forbidden to dispose or leave packaging material as a potential source of danger for children. Some
parts of the solar panel can reach high temperatures and cause burns; make sure that they cannot accidentally come
into contact with people, animals and things sensitive to high temperatures.
1.6. PLAQUE OF TECHNICAL DATA
The technical data plate is located on the side of the appliance, on the tray. It contains the serial number of the
appliance and the year of manufacture required to request spare parts or to report technical problems to the
manufacturer.
.

1.1. GENERAL WARNINGS

• The instruction manual is an integral and essential part of the product and must be kept by the user.
• Carefully read the warnings contained in the booklet as they provide important information regarding the safety of
installation, use and maintenance.
• Keep the booklet with care for any further consultation.
• Installation and maintenance must be carried out in compliance with the regulations in force according to the
manufacturer's instructions and by qualified personnel authorized by law.
• Professionally qualified personnel means those with specific technical competence in the sector of heating systems
for civil use, production of hot water for sanitary use and maintenance. The staff must have the qualifications required
by the law in force.
• Incorrect installation or poor maintenance can cause damage to people, animals or things, for which the
manufacturer is not responsible.
• In case of failure and / or malfunction of the appliance, contact only qualified personnel in accordance with the law.
• Any repairs of the products must be carried out only by personnel authorized by the Manufacturer, using only
original spare parts. Failure to comply with the above can compromise the safety of the appliance.
• To ensure the efficiency of the appliance and its correct functioning, it is essential to have maintenance performed
by qualified personnel.
• If the appliance is sold or transferred to another owner or if you move and leave the appliance, always make sure
that the manual accompanies the appliance so that it can be consulted by the new owner and / or installer.
• For all appliances with options or kits (including electric ones) only original accessories must be used.
• This appliance must be used only for the purpose for which it was expressly intended. Any other use has to be
considered improper and therefore dangerous.
Pag.2 / 9
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido