Publicidad
Idiomas disponibles
Idiomas disponibles
O P E R AT I N G I N S T RU C T I O N S
LOADING THE CUTLERY RACK
The cutlery rack is best suited for flatware and
most cooking or serving utensils.
The separators on the cutlery racks help keep
flatware separated to avoid damage and improve
cleaning.
Sample 10-place setting.
Knife, fork, and spoon handles should be
positioned between the tines.
Right
Alternate
16
Wrong
If the handles of your
flatware are too thick,
then reverse the pieces
so the handles face the
other direction as
shown in the bottom
figure.
HEIGHT ADJUSTABLE TRAY
Each side tray can be adjusted independently to a
high or low position to accommodate different sizes
of utensils or cutlery.
Each tray is adjusted by lifting it out and rotating it
front to back.
Removable Cutlery Rack
The entire cutlery rack can be removed if more
space is needed on the upper rack for larger items.
NOTE :
Always remove cutlery from the rack before
removing the rack.
Pull the rack out to the end of the rails, then lift
the front of the rack so the rollers clear the stop
on the end of the rail. The rack can now be slid
forward and removed from the rails.
WARNING
Be careful when loading and unloading sharp-
edged items. Load sharp knives with the blade
down in order to reduce the risk of injury.
Publicidad
