Publicidad
Idiomas disponibles
Idiomas disponibles
CLEAN AND MAINTENANCE
Cleaning
Disconnect the power supply before cleaning and maintenance.
In order to ensure the life of the oven, clean it in time after cooking. Cleaning steps are as
follows:
1.
After cooking, wait for the oven to cool completely.
2.
Remove oven accessories, rinse with warm water and dry.
Clean up food debris from the oven chamber.
3.
Wipe the oven with a soft cloth stained with detergent, then dry with a dry soft cloth.
4.
Notes
1.
Do not use sharp cleaning tools, hard brush and corrosive cleaning products, so as
not to damage the oven and its accessories.
Do not use rough scrubbing agent or sharp metal spatula to clean the door glass.
2.
Lamp Replacement
Switch off and disconnect the power from the oven. Ensure that the internal parts are cool
1.
before touching internal parts.
2.
Remove the lamp cover by turning it counter-clockwise (note, it may be stiff), replace the bulb
with a new one of the same type.
3.
Insert the new bulb, which should be resistant to 300°C. For replacement bulbs contact your
local service centre.
4. If in any doubt, consult a qualified electrician for help.
WARNING:
To avoid electric shocks-please ensure that the electricity supply to the appliance is switched
off and the appliance is fully cold before removing the lamp lens.
14
V.1
Publicidad
