TFA 30.3074.10 Instrucciones De Uso página 15

TFA_No. 30.3074_Anl_04_23
Wireless Thermometer
6.1.1 DCF reception
• By default, the DCF reception is activated (DCF ON) and after
successful reception of the DCF signal no manual time setting is
necessary.
• In the setting mode, you can deactivate (DCF OFF) or activate
again the DCF reception using the MAX/+ or –/MIN button.
• Once the DCF time reception is deactivated the clock must be
manually set. No time zone will appear.
• If the DCF reception is activated, the manually set time will be
overwritten by the DCF time when the signal is received success-
fully.
6.1.2 Time zone setting
• In the setting mode, use the MAX/+ or –/MIN button to make the
time zone correction (-12/+12).
• The time zone correction is needed for countries where the DCF
signal can be received but the time zone is different from the
DCF time (e.g. +1=one hour plus).
6.1.3 Automatic reset of the maximum and minimum values
• In the setting mode, you can activate (AUTO MIN MAX ON) or
deactivate again the automatic reset of the maximum and mini-
mum values using the MAX/+ or –/MIN button.
• If the automatic reset is activated, AUTO appears on the display.
• The maximum and minimum values will be reset automatically
every midnight at 0:00 (see "Reset of maximum and minimum
values").
6.2 Maximum and minimum values
6.2.1 Indication of maximum and minimum values
• Press the –/MIN button in normal mode. MIN flashes on the dis-
play.
• You can now see the lowest measuring value since the last
reset with time and date of recording.
• The sequence is shown as follows: Indoor temperature, indoor
humidity, outdoor temperature.
• If you have installed more than one transmitter, press the
CHANNEL button to change between the outdoor transmitters.
• Press the –/MIN button once more to go back to the current
values display.
• Repeat the process by pressing the MAX/+ button to see the
maximum values. MAX flashes on the display.
19.04.2023 16:18 Uhr
– 28 –
Seite 15
Wireless Thermometer
6.2.2 Reset of maximum and minimum values
a) Manual reset
• Press and hold the SET button for 3 seconds while the highest
or lowest values are displayed. The values will be deleted and
reset to the current state.
b) Automatic reset
• Provided that in the setting mode the automatic reset is activat-
ed (AUTO MIN MAX ON). AUTO appears permanently on the
display.
• All maximum and minimum values will be reset automatically
every midnight at 0:00.
• An interim manual reset is still possible.
6.3 Comfort level (Fig. 4)
• On the display appears a smiley to indicate the comfort level.
• Provided that in the setting mode the function is activated
(default ON).
7. Location and mounting
• When placed outdoors, choose a shady and dry place for the
transmitter. Direct sunlight may trigger incorrect measurement
and continuous humidity damages the electronic components
needlessly.
• Place the base station in any room of the house.
• Avoid being close to possible sources of interference that may
affect radio reception. It is recommended to keep a distance of
at least 2 metres to possibly interfering sources (TV, computer,
microwave, wireless phones, baby monitors) and large metal
objects (e.g. refrigerator). Within solid walls, especially ones
with metal parts, the transmission range can be reduced con-
siderably. In extreme cases, please place the unit close to a win-
dow to improve reception.
• Check whether the transmission from the transmitter to the
base station is possible and whether the DCF radio clock signal
can be received.
• If necessary, choose, another position for the outdoor transmit-
ter and/or receiver.
• If the transmission is successful, you can place or wall mount
the base station and the outdoor transmitter with the suspen-
sion device.
– 29 –