Byox BOLT Instrucciones De Uso página 8

2.Pay attention to your surroundings and make sure that the place you are going to ride is clear.
3.Push with one foot at the side of the scooter in order to give it a boost.
4.Turn the handlebar to the left or right, in order to turn.
5.Repeat this action of pushing, in order to keep moving.
6.In order to stop or slow down, put the foot that pushes the scooter on the ground. If you tilt too much to the left or right, you can turn the scooter
and fall. The scooter does not have a starting device and a stopper.
7.Practice balancing on the scooter before you start riding it.
STOPPING WITH THE SCOOTER – SCHEMA C
The scooter does not have a starting device. It has a stopping device, which does not activate automatically. Stopping is an important skill and
must be acquired in time. Never lift your hands - hold the handlebar firmly.
1.Make sure that you hold the handlebar firmly with both hands and move in a straight line. Slide one foot back towards the rear wheel of the
scooter. 2. With the heel of this foot gradually apply pressure on the brake mechanism. This will reduce the speed and will finally lead to stopping of
the scooter.
WARNING! The breaking mechanism can get heated during use. DO NOT touch the brake after stopping! While using the brake never touch it or
the wheels – during continuous use for reduction of the speed and during stopping their temperature rises and you may burn your hands!
INSTRUCTIONS FOR USE
Before each use, make sure that:
• The scooter is correctly assembled, and handlebar is correctly adjusted.
All locking devices and self-locking attachments are switched on and in full working order.
•
The wheels are tightened at the axles and rotate well. If there is any friction or the wheels totters, you must immediately stop using the
•
product.
• The hand grips are not torn at their ends.
• All the bolts and other components are well fixed and show no signs of abnormal wear.
CARE AND MAINTENANCE
Keeping the kick scooter clean and in good working order will extend its life and function while maintaining your child's safety.
• Regularly clean with a soft, wet cloth, after that wipe dry. Do not use abrasive cleaning agents.
The bearings are adjusted to the wheels of the fixed type which means that they require little to no maintenance. They are cleaned with
•
dry cloth and are to be oiled. This increases their period of use and improves the exploitation qualities of the scooter.
• Make sure that the area around the wheels is kept clean and no mud is left on it. Oil the bearings regularly. Do not ride the scooter in wet
weather. If you have rode it in wet weather, afterwards wipe it dry thoroughly.
• Do not leave the product exposed to the negative effects of external factors such as rain, snow and direct sunlight.
Keep the scooter in dry and well-ventilated places.
•
8