Descargar Imprimir esta página

BTI PROFILINE RL 60 Instrucciones Para El Manejo página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
TECHNICAL DATA
Dust- and waterproof:
Operating temp.:
Storage temp.:
Tripod attachments:
Weight:
Low voltage indication:
Low voltage disconnection:
1) at 21° Celsius
2) under optimal atmospheric circumstances
3) along the axis
DECLARATION OF CONFORMITY
We
BTI Befestigungstechnik GmbH
Postfach 40
74665 Ingelfingen
declare under our sole responsibility that the product RL60 to which this declaration relates is in conformity
with the following standards EN 61000-6-3:2007; EN 55022:2006; EN 61000-6-2:2005; EN 61000-4-2:1995
+ A1:1998 + A2:2001 ;EN 61000-4-3:2002 + A1:2002 following the provisions of directive Electromagnetic
compatibility 2004/108/EC.
This is to certify that the construction laser (S/N Page 2) complies with the specifications mentioned in the
operating manual when leaving our facilities. All instruments are controlled on a 100%-basis; the individual
data are kept in our files.
The managing director
Electro-Magnetic Compatibility
Declaration of Conformity
This digital apparatus does not exceed the Class B Limits for radio noise for digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of Communications.
This device complies with part 15 off the FCC rules. Operation is subject to the condition that this device does
not cause harmful interference.
Note: The product been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. The product generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception, which can be determined by turning
the product off and on. The user is encouraged to try to eliminate the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• For more information, consult your dealer or an experienced radio/television technician.
Caution: Changes or modifications to the product that are not expressly approved by BTI could void
authority to use the equipment.
12
IP54
23°F...113°F (-5°C ... 45°C)
-4°F...158°F (-20°C ... 70°C)
5/8 x 11 horizontally and vertically
1.5 kg (3.3 lbs)
flashing/shining of the battery indicator
unit shuts off

Publicidad

loading