THERMEx TF01BF Manual De Instrucciones página 90

90 THERMEX THO1BFPy
SETUP AND TIMER FUNCTIONS
always start by turning on/activating the oven. This is done by holding "
setting the timer functions requires that the oven is first switched on/activated.
1. set the clock / system time
In active mode, press "
" will not flash, but the hour and minute numbers in the display will flash (including the "h" icon and the
"min" icon, 1 time/second)
Set the time by pressing "+" and " —" (0:00~23:59~0:00).
Note: A long press on "+ / —" will incrementally adjust the clock by 5 min at a time. Short press on "+ / —"
will adjust by 1 min.
After setting the clock/system time, wait 10 seconds to automatically confirm the selected time.
when setting hours and minutes, the values for minutes and hours flash; when the clock setting is com-
pleted, if not " " within 10 seconds to confirm, the system will default to complete the clock setting and
exit the clock setting.
If the power is removed from the device, the clock is reset.
2. set alarm
In active mode, press "
will flash.
Set the time by pressing "+" and " —" (0:00~23:59~0:00).
Note: A long press on "+ / —" will incrementally adjust the clock by 5 min at a time. Short press on "+ / —"
will adjust by 1 min.
After setting the clock/system time, wait 10 seconds to automatically confirm the selected time.
" once to enter clock setting mode. At this time, the hour icon of the clock ":
" twice to enter alarm setting mode. At this time, the alarm icon for the watch
M 905211020228032023
" for 3 seconds.