Publicidad
Idiomas disponibles
Idiomas disponibles
®
R&S
UD1065
Risk of instrument damage during operation
An unsuitable operating site or test setup can damage the instrument and
connected devices. Ensure the following operating conditions before you
switch on the instrument:
● All fan openings are unobstructed and the airflow perforations are unim-
peded. The minimum distance from the wall is 10 cm.
● The instrument is dry and shows no sign of condensation.
● The instrument is positioned as described in the following sections.
● The ambient temperature does not exceed the range specified in the
data sheet.
● Signal levels at the input connectors are all within the specified ranges.
● Signal outputs are correctly connected and are not overloaded.
EMI impact on measurement results
Electromagnetic interference (EMI) may affect the measurement results.
To suppress generated electromagnetic interference (EMI):
● Use suitable shielded cables of high quality. For example, use double-
shielded RF and LAN cables.
● Always terminate open cable ends.
● Note the EMC classification in the data sheet.
●
Unpacking and Checking the
●
Placing or Mounting the
●
Connecting AC
●
Turning the R&S UD1065 on and
3.1
Unpacking and Checking the Instrument
Unpack the R&S UD1065 carefully and check the contents of the package.
Getting Started 1178.4176.02 ─ 02
Instrument.......................................................... 8
Instrument.................................................................. 9
Power.....................................................................................12
Unpacking and Checking the Instrument
off.............................................................. 12
Preparing for Use
8
Publicidad
