Rohde & Schwarz UD1065 Manual De Instrucciones página 27

®
R&S UD1065
3.3 Connecting AC Power
In the standard version, the R&S UD1065 is equipped with an AC power supply
connector. The R&S UD1065 can be used with different AC power voltages and
adapts itself automatically to it. Refer to the datasheet for the requirements of
voltage and frequency. The AC power connector is on the rear panel of the instru-
ment.
For details on the connector, see
► Connect the R&S UD1065 to the AC power supply using the supplied power
cable.
The R&S UD1065 complies to the specifications of safety class EN61010.
Thus, make sure that you only connect it to a power socket that has a ground
contact.
3.4 Turning the R&S UD1065 on and off
After you have established a connection to the power supply, you can turn on the
R&S UD1065.
Turning on the R&S UD1065
► Turn on the main AC power switch on the rear panel of the R&S UD1065
(position "I").
The instrument is supplied with AC power.
Green "Power" LED on the front panel: R&S UD1065 is running and ready for
operation.
Turning off the R&S UD1065
► Turn off the main AC power switch on the rear panel of the R&S UD1065
(position "0").
The instrument is no longer supplied with AC power.
Getting Started 1178.4176.02 ─ 02
Turning the R&S UD1065 on and off
Chapter 4.2.1, "Power
Preparing for Use
Supply", on page 15.
12