LEMANIA ENERGY T13 Manual De Instrucciones página 19




The recorded results can be compared with the tables below to indicate the state of the alternator, and are
categorized into three sections
1. Without Electrical Load Test (2,500 ~ 3,000 RPM)
2. With Electrical Load Test (1,500 ~ 2,000 RPM)
3. Diode AC Ripple Test with Load (Idling speed: 700 ~ 1,000 RPM)
The AC ripple of the alternator is checked to see if it is within an average of the 0.5V limit. If one of
the diodes is faulty, the AC ripple will produce higher than the accepted 0.5V. Indicating that the
alternator is not functioning correctly.
To print the results, press the printer symbol on the tester. Pressing the return key will exit the tests.
Symbols
V: Maximum Voltage (V max)
V: Minimum Voltage (V min)
AV: Average Voltage
Page 19 of 60