Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the legs
If your refrigerator is unbalanced, you can balance your
refrigerator by turning its front legs as illustrated in the figure.
The corner where the leg exists is lowered when you turn in
the direction of the black arrow and raised when you turn in
the opposite direction. Taking help from someone to slightly
lift the refrigerator will facilitate this process.
Connecting the water line to the water supply
(select models)
Connect the water line to a water supply valve. If a valve is
not present or you are not sure, consult a qualified plumber.
Connecting the water hose to the
refrigerator
1. Slip the union (B) onto the water hose (A)
2. Push the water hose downwards firmly to slip it onto the
water inlet valve (C).
3. Tighten the union (C) by hand to secure it onto the water
inlet valve. Normally, you are not required to tighten the
union with a tool. However, you can use a wrench or pliers
to tighten the union if there is a leakage.
Changing the lightbulb
To change the Bulb/LED used for the illumination of your
refrigerator, call your Authorized Service. The lamp(s) used in this
appliance is not suitable for household room illumination. The
intended purpose of this lamp is to assist the user to place
foods in the refrigerator/freezer in a safe and comfortable
way. The lamps used in this appliance have to withstand
extreme physical conditions such as temperatures below -4 °F.
(only chest and upright freezer)
Electrical Connection
grid using an extension cord or
multi-plug adapters.
cable must be replaced by the
Authorized Service Agent.
them.
• Our company shall not be liable for any damages that will
arise when the product is used without proper
grounding and electrical connections in accordance
with national and local regulations.
• Power cable plug must be within easy reach after installation.
• Do not connect your unit to the wall outlet using an
extension cord or a cordless multioutlet.
7
Publicidad
