Descargar Imprimir esta página

GE DVM1950 Manual Del Propietário página 28

Ocultar thumbs Ver también para DVM1950:

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing the light bulb.
remove screw.
About the exhaust feature.
charcoal filter (on some models).
reusable vent filters
(on all models).
28
All manuals and user guides at all-guides.com
Cook
Defrost
Popcorn
Settings
Timer
Reheat
Family
Snacks
Soften
Steam
Defrost
Cook
Settings
Timer
Popcorn
Reheat
Family
Snacks
Soften
Steam
Cook
Defrost
Popcorn
Settings
Timer
Reheat
Family
Snacks
Soften
Steam
Cooktop Light/Nite Light
Replace with a 120 volt, 25 or 50 watt (max.)
halogen bulb. Order WB36X10213 from your
GE supplier.
1
To replace the cooktop light/nite light, first
disconnect the power at the main fuse or
circuit breaker panel, or pull the plug.
2
Remove the screw from the side of the
light compartment cover and lower the
cover until it stops.
3
Be sure the bulb is cool before removing.
Break the adhesive seal by gently
unscrewing the bulb.
4
Screw in the new bulb, then raise the light
cover and replace the screw. Connect
electrical power to the oven.
Vent Fan
The vent fan has two metal reusable vent
filters.
Models that recirculate air back into the room
also use a charcoal filter.
Reusable Vent Filters
The metal filters trap grease released by foods
on the cooktop. They also prevent flames from
foods on the cooktop from damaging the
inside of the oven.
For this reason, the filters must always be
in place when the hood is used. The vent
filters should be cleaned once a month, or as
needed

Publicidad

loading

Este manual también es adecuado para:

Jnm1951Jvm1950Jnm1951srss