GE DVM1950 Manual Del Propietário página 31

Before you call for service....
Troubleshooting Tips
Save time and money! Review the charts on the following pages first and you may
not need to call for service.
Problem Possible Cause
Oven will not start A fuse in your home may be
blown or the circuit breaker
tripped.
Power surge.
Plug not fully inserted into
wall outlet
Door not securely closed.
Power Saver (Energy Saver)
button not engaged.
Control panel Door not securely closed.
lighted, yet oven will
START/PAUSE button not
not start
pressed after entering cooking
selection.
Another selection entered
already in oven and CANCEL/
OFF button not pressed to
cancel it.
Cooking time not entered
after pressing TIME COOK
CANCEL/OFF was pressed
accidentally.
Food weight not entered after
selecting AUTO DEFROST or 1
lb QUICK DEFROST.
Food type not entered after
pressing AUTO COOK.
CONTROL LOCKED The control has been locked.
appears on display
Floor of the oven is The cooktop light is located
warm even when below the oven floor. When
the overn has not light is on, the heat it
produces may make the oven
been used
floor get warm.
You hear an unusual You have tried to change the
low-tone beep power level when it is not
allowed
All manuals and user guides at all-guides.com
What To Do
• Replace fuse or reset circuit breaker.
• Unplug the microwave oven, then plug
it back in.
• Make sure the 3-prong plug on the
oven is fully inserted into wall outlet.
• Open the door and close securely.
• Push the Power Saver (Energy Saver)
button so it is pressed in.
• Open the door and close securely.
• Press START/PAUSE.
• Press CANCEL/OFF.
• Make sure you have entered cooking
time after pressing TIME COOK.
• Reset cooking program and press
START/PAUSE.
• Make sure you have entered food
weight after selecting AUTO DEFROST
or FAST DEFROST.
• Make sure you have entered a food
type.
• Press and hold CANCEL/OFF for about
3 seconds to unlock the control.
• This is normal.
• Many of the oven's features are preset
and cannot be changed.
31