Descargar Imprimir esta página

Nordcap Z 140-140 Instrucciones De Montaje página 13

Publicidad

Esquema de Montagem | Assembly Diagram | Schèma de Montage | Montageanleitung |
Schema di Montaggio | Esquema de Ensamblaje| Montage Overzicht
PT
1. Encaixar o painel (C6)+(C6);
2. Verificar/ajustar painel para que fique nivelado com o
painel (DI) e com o aro (AE);
3. Apertar os fechos;
4. Colocar bolachas (A) nos fechos.
EN
1. Fit the panel (C6)+(C6);
2. Check/adjust the panel so that it is leveled with the panel
(DI) and with the frame (AE) ;
3. Fasten the camlocks;
4. Insert the alignment chips (A) into the camlocks.
FR
1. Emboiter le panneau (C6)+(C6);
2. Vérifier/régler le panneau afin qu'il soit nivelé au panneau
(DI) et au cadre (AE) ;
3. Serrer les crochets ;
4. Insérer les jetons (A) dans les crochets.
DE
1. Die Wand (C6)+(C6) einsetzen ;
2. Die Wand überprüfen/anpassen, damit diese mit der Wand
(DI) und dem Rahmen (AE) auf der gleichen Ebene ist;
3. Die Haken anschrauben;
4. Die Ausrichtungsmarken (A) in die Haken anbringen.
PT
Exclusivamente nas câmaras de 2310mm de altura, colocar
(1x) bolacha (A) no fecho do aro.
EN
Exclusively in 2310mmm high cold rooms, insert the (1x)
alignment chip (A) into the camlock of the frame.
FR
Exclusivement dans les chambres froides avec 2310mm de
hauteur, insérer le (1x) jeton (A) dans le crochet du cadre.
DE
Ausschlieβlich in den Kühlzellen mit 2310 Höhe, die (1x)
Aurichtungsmarken in die Haken des Rahmens anbringen.
IT
1.Fissare il pannello porta (C6)+(C6);
2.Controllare ed assestare i pannelli (DI) e (AE) affinchè siano
livellati;
3.Fissare le chiusure;
4.Collocare i gettoni (A) nelle chiusure.
ES
1. Encajar el panel (C6)+(C6);
2. Verificar/ajustar el panel para nivelarle con el panel (DI) y
el aro (AE) ;
3. Apretar los ganchos ;
4. Colocar las fichas (A) en los ganchos.
NL
1. Plaats het paneel (C6)+(C6) in de gleuven;
2. Controleer / pas het paneel aan tot het even ligt met het
paneel (DI) en met de lijst;
3. Schroef de koppelingen vast;
4. Plaats de rubberen chips (A) in de koppelingen.
IT
Collorare
esclusivamente nelle camere con altezza 2310mm.
ES
Exclusivamente en las cámaras frigoríficas con 2310mm de
altura, colocar la (1x) ficha (A) en lo gancho del aro.
NL
Enkel bij koelcellen met een hoogte van 2310 mm, plaats de
rubberen chip in de koppelingen van de deurlijst.
13
N.º
EDM00002_O2
O3
(1x)
gettoni
nei
fori
del
pannello
porta

Publicidad

loading

Este manual también es adecuado para:

46710702002-0-0-0