Craftsman 316.794831 Manual Del Operador página 4

FOR 2 YEAR(S) from the date of purchase, this product is warranted against any defects in material or workmanship. Defective product will receive free repair
or free replacement if repair is unavailable.
For warranty coverage details to obtain repair or replacement, visit the web site: www.craftsman.com
This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT include:
Expendable items that can wear out from normal use within the warranty period, such as air cleaner or spark plug.
•
Product damage resulting from user attempts at product modifi cation or repair or caused by product accessories.
•
Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
•
Preventive maintenance, or repairs necessary due to improper fuel mixture, contaminated or stale fuel.
•
This warranty is void if this product is ever used while providing commercial services or if rented to another person. This warranty gives you specifi c legal
rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
APPLICATIONS
Cleaning yards, garages, driveways, porches, patios, around walls,
•
fences and more
ASSEMBLING UNIT
Installing Blower Tube
1. Align the bump on the end of the
blower tube with the bump slot on
the bottom end of the blower outlet
(Fig. 1).
2. Insert the blower tube into the
blower outlet (Fig. 1).
3. Twist the blower tube clockwise until
it locks into place (Fig. 1).
Installing Nozzle/Curved Tube
1. Align the bump slot on the top end
of the nozzle/ curved tube with the
bump on the end of the blower tube
(Fig. 2).
2. Place the nozzle onto the blower
tube (Fig. 2).
3. Twist the nozzle clockwise until tight
(Fig. 2).
4
WARRANTY
CRAFTSMAN 2 YEAR FULL WARRANTY
KNOW YOUR UNIT
Blower Tube
Nozzle
ASSEMBLY INSTRUCTIONS
Blower
Outlet
Blower
Tube
Bump
Fig. 1
Blower
Tube
Nozzle/
Curved
Bump
Tube
Fig. 2
Grip
On/ Off Switch
Throttle Control
Spark Plug Cover
Oil Plug
Starer Rope Grip
Curved Tube
Removing the Blower Tube
1. Hold the unit fi rmly.
2. Insert a fl athead screwdriver into the
Tube Lock. Twist the screwdriver
counterclockwise 1/4 turn and hold
(Fig. 3).
3. Grasp the blower tube and twist it
counterclockwise (Fig. 3).
4. Pull the blower tube from the blower
outlet.
Removing the Nozzle/Curved Tube
1. Hold the blower tube fi rmly.
2. Grasp the nozzle and twist it counterclockwise until the nozzle unlocks
from the blower tube.
3. Remove the nozzle from the blower tube.
Primer Bulb
Air Filter Cover
Fuel Cap
Tube Lock
Fig. 3