FONESTAR MIX-4LIVE Manual De Usuario página 5

CONNECTION
- Before making any connections, make sure that all devices are switched off and disconnected from the
power supply.
- Check that all volume controls for each channel and the MAIN MIX output are set to minimum.
- Connect the desired equipment to the input channels.
- If you want to use the player, connect a USB device and press the LINE-LS/PLAYER selection button on
channel 3/4.
- Connect the MAIN MIX output to a line level input of a power amplifier.
- Connect the equipment to the power supply. Switch on the equipment in this order: peripheral equipment,
followed by the MIX-4LIVE mixer and lastly the power amplifier (if necessary).
- Adjust the gain of each channel by displaying the channel's CLIP indicator.
- Adjust the volume of each channel with the VOL volume controls.
- Adjust the output level of the MAIN MIX main mix bus with its VOL volume control.
- 5 -
EN