TECshow NAVIGATOR NODE 8 MKII Manual De Usuario página 5

4. MENU INSTRUCTIONS
Rename
Enter into the main menu by press UP/DOWN button,
then pressing the button to choose the Rename op-
tion and then press the ENTER button to confirm your
selection. Now you can rename the device by pressing
UP and DOWN . Confirm you change and move to next
option by press the ENTER.
Set DHCP
Enter into the main menu by press UP/DOWN button,
then pressing the button to choose the Set DHCP
option and then press the ENTER button to confirm
your selection. Now you can turn on or turn off the
DHCP function by pressing UP and DOWN. Confirm you
change and move to next option by press the ENTER.
Set IP Address
Enter into the main menu by press MENU button, then
pressing UP / DOWN to choose the Set IP Address op-
tion and then press the ENTER to confirm your selec-
tion. Now you can set IP address by pressing UP and
DOWN . Confirm you change and move to next option
by press the ENTER and UP/DOWN.
Please note: Each of the IP address should be unique.
Set Netmask
Enter into the main menu by press MENU button, then
pressing UP / DOWN to choose the Netmask option
and then press the ENTER to confirm your selection.
Now you can set Netmask by pressing UP and DOWN .
Confirm you change and move to next option by press-
ing the ENTER and UP/DOWN.
Rename
ArtNet to DMX
Cancel Enter
DHCP
Enable Disable
IP Adress
002.010.010.002
Cancel Enter
Netmask
A. 255.000.000.000
B. 255.255.000.000
C. 255.255.255.000
English version | Tecshow Node 8 MKII
P. 5