Port Status - TECshow NAVIGATOR NODE 8 MKII Manual De Usuario

Set Default
All of the setting including the device name, device
ID as well as device IP will be restored to the origi-
nal status.
Version
You can check the version number from this option.

5. PORT STATUS

Under the standby status mode, you can press UP/
DOWN to move onto the Port Status display page.
Here you can see the status of every port. Please
check the below chart for details.
A B
√ X
A/B
P. 8
Tecshow Navigator Node 8 MKII |
English version
Port Status
1 2 3
X √ X
―
The second line:
The third line:
B1.0
4 5
√ ―
― ―
√: network cable connected
X: network cable NOT connected
Flash between √ and x under the
√/x
DHCP mode: means the fixture is
still searching for IP address. Or
means no IP address.
― : means both port DHCP enable,
otherwise both port static IP
―
Version
V1.0
6 7
― ×
―
8
√
―