Publicidad
Idiomas disponibles
Idiomas disponibles
Do not attempt to disassemble or repair the appliance yourself
as this may be dangerous.
If any anomaly is detected, check the following table
Problem
The appliance
does not work
The
dehumidifying
function does
not work
No air outlet
Operation is
noisy
E1 Code
Cause
- Is the power plug
connected?
- Water tank is
full or not well
assembled?
- Operation
temperature
is too low or
too high.
- Is the filter
blocked
- Is the air inlet or
outet blocked?
- Is the filter
plugged?
- Is the machine
tilted or unstable?
- Is the air filter
clogged
- Coil sensor short
circuit or open
circuit
13
Solution
- Connect the
appliance to the
mains.
- Pour away the
water from
water tank and
place it back
into the unit.
- Working
temperature:
5-35ºC.
- Clean the filter
according to the
cleaning
instruction.
- Remove the
obstruction from
the air inlet or
outlet.
- Clean the filter
screen according
to the cleaning
instruction.
- Place the unit on
an even, solid
surface (to avoid
vibrations).
- Clean the air filter
as per as
instructions.
- Check whether the
line is loose or
replace the coil
sensor.
Publicidad
