Publicidad
4. Insert the plug into a duly installed 230 V~, 50 Hz protective contact socket.
5. Shift the switch on the handle to one of the desired heat/blowing levels:
Level 0: off
Level : Cold setting for style fix
Level 1: medium airflow and medium temperature
Level 2: strong airflow and high temperature
Switch-off
After use shift the switch to position "0" and pull out the plug. Leave the device to cool be-
fore putting it away! To this purpose place the device on one side of the housing or hang it
up by the suspension lug.
The handle can be folded in for easy transport when traveling.
Cleaning and care
WARNING:
• Always disconnect from the mains when cleaning.
• The device must never be immersed in water! This may lead to electric shock or fire.
CAUTION:
• Do not use wire brushes or other abrasive materials.
• Do not use caustic or scouring agents.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the device, as over time this may result in the cable
breaking.
• Check the mains cable regularly for damage.
Air Intake Grill
• Please clean the grill on the air intake side of the hairdryer regularly in order to avoid
excessive temperatures as a result of heat accumulation.
• Remove any dirt that is present. If necessary, a fine brush can be used.
English
31
Publicidad
