Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Front Glass Installation
1. Ensure there are no debris or finger prints on the inner
side of the front glass before you begin.
2. Attach the provided suction cups to the outer side of
the front glass. Ensure the suction cups are securely
attached.
3. Using the suction cups to assist, lift the glass and
place it directly in front of the media bed at a slight
angle.
4. Lift the front glass slightly to hook the front glass onto
the posts on each side of the fireplace.
5. Remove the suction cups and clean any fingerprints or
debris off the glass with a nonabrasive glass cleaner.
!
NOTE: Do not dispose of the suction cups! Keep
them in a secure location, as they may be needed for
maintenance and service on this fireplace.
18
Figure 16
Front Glass Post
(One on each side)
www.dimplex.com
Publicidad
