MAGICKWOODS Elements 30316 Instrucciones De Montaje página 3

Adapter
Transformer
Socket
TROUBLESHOOTING
Problem:
Cabinet is higher on one side than the
other.
1) Cabinet door rubs against another
surface.
2) There is a large uneven gap between
the cabinet door and cabinet.
Side adjustment:
Using a Phillips screwdriver, rotate screw (1)
clockwise to move the door left and
counter-clockwise to move the door right.
Moves the door up to 2 mm.
Connect to
power supply
Adapter
Socket
Touch sensor
Figure 8
Possible Cause:
Mounting screws are not level.
Wall is not level.
Depth adjustment:
Using a Phillips screwdriver, rotate screw (2)
clockwise to move the door forward and counter-
clockwise to move the door backwards.
Moves the door up to 2 mm.
Figure 10 - Adjusting Hinges
Magick Woods Exports Pvt. Ltd. Customer Service:
Phone: 1-855-995-5578 • Fax: 905-738-5579 • Email: contactus@magickwoods.com
Connect to
power supply
Figure 9
Corrective Action:
Remove the cabinet from the wall and check
the mounting screws. Adjust as needed.
Adjust the door hinges. Figure 10.
Height adjustment:
Using a Phillips screwdriver, rotate screw
(3) clockwise to move the door upward and
counter-clockwise to move the door
downward. Moves the door up to 2 mm.
Connect to
power supply
Touch sensor