Climate Class; Correct Ventilation - Essential ECAVD185-70b1 Instrucciones De Uso

The appliance must be installed in such a way that the power outlet is still accessible.
•
After installation, make sure that the appliance is not resting on its own power
•
cable.
Leave the appliance in its final location for 2 hours before connecting to the
•
mains. This will allow the refrigerant circuit to stabilize.
WARNING: to avoid any risk caused by instability of the appliance, make
•
sure it is fixed in place in accordance with the instructions provided.

Climate class

Only install the appliance in a place where the ambient temperature matches
the climate class it has been designed for.
The climate class is indicated on the rating plate, which is located on the exterior
of the appliance. The below table indicates the appropriate ambient temperature
for each climate class:
Climate class
Your appliance is rated "SN/N/ST/T". When below or above the indicated ambient
temperatures, the performance of your appliance may be affected and there is a
risk of food expiration.

Correct ventilation

Make sure that air can always circulate freely around the appliance.
To ensure the proper functioning of your appliance, please do not obstruct the
ventilation openings.
When in use, your appliance will give off heat. Be sure to maintain a minimum
clearance of 300mm above the appliance, 100mm on each side and 50mm
behind the appliance.
If installing your appliance next to another refrigerator or freezer, be careful not
to place the two appliances too close to each other in order to prevent any
condensation from forming on the exterior of the appliance.
SN
N
ST
T
Ambient temperature
From +10 to +32°C
From +16 to +32°C
From +16 to +38°C
From +16 to +43°C
47
V.1.0
installation