Essential ECAVD185-70b1 Instrucciones De Uso página 49

2. Unscrew the three screws from the top
right hinge, remove the hinge and set
aside.
3. Thread the power cable from the control
panel through the hole in the door.
4. Unscrew the screws from the upper
left hinge cover and remove the cover.
Remove the wiring harness from the hole
and install the sleeve.
5. Lift the freezer door by about 50mm to
remove it. Place it on a soft surface to
avoid any scratches.
49
V.1.0
installation