Carat DPZ0200000 Manual De Instrucciones página 24

6. Keep holding [B] Adapting Unit and tighten the Bolt with [D] Wrench securely.
D
Bolt
7. Set [H/I/K] Spacer, [G] Base
Flange or Original Flange,
and Blade into the Spindle
then tighten the Lock Nut by
Wrench.
Refer to the
Installation
Guide
8. Hang the Shaft of [A] Main
Unit into the Hook of
[B] Adapting Unit.
24
For some grinders, tighten 3 screws originally used for fixing
the Guard.
HD28AG-125, AGV17-125, AG16-125, AG8-125, AG9-125 type
(OLD type)
L3410FR, L3410VR type
Lock Nut
Blade
G
or Original Flange
H/I/K
Spindle
B Haak As
Wrench
A