Carat DPZ0200000 Manual De Instrucciones página 26

12. Adjust the position of Guide Ring at Front Roller
with that of Blade.
Cutting
1. Release the Thumb Screw and adjust the
position of Base to the required cut depth.
2. The Scale shows the approximate cut depth
when the Base Line is aligned with the
Guide Mark.
Base
Thumb Screw
DO NOT lift or move backward the angle grinder as it leads to the scattering of the Dust.
Carat Nederland B.V.
www.carat-tools.nl | www.carat-tools.com
www.carat-tools.be | www.carat-tools.dk
26
13. Attach the Handle into M8 / M10 port.
Front Roller
Guide Ring
Blade
3. Securely hold the angle grinder and handle.
4. Turn on the switch of the vacuum and angle
5. Place the Front Roller on material, then
Scale
Base
Line
Guide Mark
Cut Depth
Handle
grinder.
slowly forward the angle grinder.
M10 port
M8 port
Cutting
Direction
Front Roller
Blade rotation