Descargar Imprimir esta página

Yamaha NS-F210BL Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

• VOLTAGE SELECTOR
(Asia and General models only)
The voltage selector switch on the rear panel of this
unit must be set to your local main voltage BEFORE
plugging this unit into the AC main supply. Voltages
are 110-120/220-240 V AC, 50/60 Hz.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if this unit itself is turned off. In this state, this unit is
designed to consume a very small quantity of power.
For Canadian Customers
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
CAN ICES-3 (B)/NMB-3 (B)
This unit's speakers use magnets. Do not place items
that are sensitive to magnetism, such as CRT-type
TVs, clocks, credit cards, floppy disks, etc., on or
beside this unit.
Taking care of the subwoofer
• When you wipe this unit, do not use chemical solvents
(e.g., alcohol or thinners, etc.): this might damage the
finish. Use a clean, dry cloth. For difficult soils,
dampen a soft cloth in water, wring it out, and then
wipe with the cloth.
• (For polish-finished model) Bumping the surface of
the instrument with metal, porcelain, or other hard
objects can cause the finish to crack or peel. Use
caution.
iii
En

Publicidad

loading