Jimmy HW10 Instrucciones De Uso página 6

Charging holder assembly
Press the holder 1 and holder 2 into the charging
base until a "click" sound is heard.(Fig6-2)
Place machine to charging base
To put machine back to charging base, hold
machine handle to lift the machine,, aim charging
slot on bottom of machine to the charging socket
on charging base and put the machine into
charging base. To use the machine, hold machine
handle and lift out machine from charging base.
(Fig7)
Dirty water tank assembly and
disassembly
To take off dirty water tank, hold machine with
one hand and hold dirty water tank with another
hand, press dirty water tank release button to
pull out dirty water tank. (Fig8-1)
To assemble dirty water tank, place dirty water
tank bottom into mainbody, push dirty water tank
towards mainbody until a "click" sound is heard.
(Fig8-2)
Brushroll window and brushroll
assembly and disassembly
To take off brushroll window, hold brushroll window
latch and pull upward to remove brushroll window.
To assemble brushroll window, align the clips on two
sides of brushroll window with the slots on two sides of
floorhead. Press brushroll window down until a "click"
sound is heard. (Fig9)
To disassemble the brushroll, pull the brushroll
cap outward to take out brushrol. To assemble the
brushroll, hold brushroll cap, slide brushroll over the
cylinder until brushroll reaches the end. (Fig10)
Clean water tank assembly and
disassembly
To take off clean water tank, hold the clean water
tank handle and pull out the clean water tank. To
assemble clean water tank, put the clean water
tank back to nozzle, align with the brushroll window.
(Fig11)
Use of the Product
Note: When using it for the first time, please fully charge
the machine before using it.
Use of upright vacuum cleaner
Press the handle on/off button, the LCD screen
and decorative lights will light up, default is in
Auto mode (Fig12), press the mode button to
switch to Floor mode (Fig13), press the mode
4
6-2
holder2
7
Charging
slot
8-1
Pulsante di rilascio
del serbatoio
dell'acqua sporca
9
Brushroll
window
Brushroll window latch
10
Brushroll
cap
12
holder1
Charging
base
Charging socket
8-2
Corpo
principale
Clean water
tank handle
Brushroll
11
Clean water
tank handle
Clean
water tank
13