Publicidad
Idiomas disponibles
Idiomas disponibles
English
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully
understand and observe the following
safety precautions and warnings. Careless
or improper use of the unit may cause
serious or fatal injury.
Read, understand and follow all warnings
and instructions in this manual and on
the unit.
Always wear eye, head and ear protectors
when using this unit.
Gloves should be worn when necessary,
e.g., when assembling cutting equipment.
Use anti-slip and sturdy footwear.
Choke - Run position (Open)
Choke - Start position (Closed)
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See "MAINTENANCE".
Index
WHAT IS WHAT ................................................................................ 7
WARNINGS AND SAFETY INSTRUCTIONS .................................. 8
SPECIFICATIONS ............................................................................ 9
ASSEMBLY PROCEDURES ............................................................. 9
OPERATING PROCEDURES ......................................................... 10
MAINTENANCE .............................................................................. 11
6
(Original instructions)
WARNING
Emergency stop
Hot Surface
15 m
Keep all children, bystanders and helpers 15 m
away from the unit. If anyone approaches you,
stop the engine and cutting attachment imme-
diately.
All
overhead
electrical
conductors
communications wires can have electricity flow
with high voltages. Never touch wires directly or
indirectly when pruning, otherwise serious
injury or death may result
and
Publicidad
