Publicidad
Idiomas disponibles
Idiomas disponibles
ES
The helmet should be adjusted to cover the
eyes and face effectively while welding.
The position of the forehead band and rear
headband can be manually adjusted to
fit securely. Rotate the gear to adjust the
tightness until it feels comfortable. The front
and rear headbands should be adjusted to
tightly cover the forehead and the backside
of head. See figure ( a ).
The distance from the lens can be adjusted by
pressing side pins and move sliders
simultaneously.
There
positions available for adjustment. See figure
( c ).
As a result of above mechanism action, the welder surely feels more comfortable than before
and are in working with more high proficiency at any time.
The depth of the headgear can be adjusted to
the position that the headgear sits above
your brow.Tighten/loosen the two slotted
straps to fit the top of your head. See
figure ( b ).
The ideal helmet position is where your eyes
are at 90°angle behind the lens. There are 7
are
5
distance
angle limitation positions available for
adjustment. Press side buttons and move the
sliders simultaneously to make the helmet
obtain the required angle limitation position.
See figure ( d ).
24
Publicidad
