Tips For Better Performance
Tips For Better Performance
•
When opening or closing the turntable cover, handle it gently,
moving it either at the center or equally from both sides.
•
Do not touch the stylus tip with your fingers; avoid bumping
the stylus on the turntable mat or a record's edge.
•
Clean the stylus tip frequently, using a soft brush with a
back-to-front motion only.
•
If you use a stylus cleaning fluid, use it very sparingly.
•
Wipe the dust cover and turntable housing gently with a soft
cloth. Use only a small amount of mild detergent solution to
clean the turntable and dust cover.
•
Never apply harsh chemicals or solvents to any part of the
turntable system.
•
Prior to moving the turntable, always unplug it from the AC
outlet and fasten the tone arm on the tone arm rest with the
vinyl twist-tie.
Specifications
Type
Platter
Motor
Speeds
Wow and flutter
Signal-to-noise ratio
Cartridge
Output level
Pre-amp "PHONO"
Pre-amp "LINE"
Phono pre-amp gain
Power
Dimensions
Net weight
Furnished accessories
Replacement stylus
8
Belt drive turntable, fully automatic
Aluminum
DC servo-controlled
33
/
RPM, 45 RPM
1
3
Less than 0.25% (WTD) @ 3 kHz (JIS)
>50 dB (DIN-B)
Integral Dual Magnet
stereo cartridge with diamond stylus
™
2.5 mV nominal at 1 kHz, 5 cm/sec
150 mV nominal at 1 kHz, 5 cm/sec
36 dB nominal, RIAA equalized
120V AC, 60 Hz, 3W
360.0 mm (14.17") W x 97.5 mm (3.84") H x 356.0 mm (14.02") D
2.98 kg (6.6 lbs.)
Dual RCA (female) to 3.5 mm (
/
") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (
1
8
mini-plug (female) stereo adapter cable; 45 RPM adapter
ATN3600L
/
")
1
8